// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "../../core/iface/IExchangeV3.sol";
import "../../lib/ReentrancyGuard.sol";
import "../../lib/OwnerManagable.sol";
import "../../lib/AddressUtil.sol";
import "../../lib/Drainable.sol";

/// @author Kongliang Zhong - <[email protected]>
contract ForcedWithdrawalAgent is ReentrancyGuard, OwnerManagable, Drainable
{
    using AddressUtil for address;

    function canDrain(address /*drainer*/, address /*token*/)
        public
        override
        view
        returns (bool) {
        return msg.sender == owner || isManager(msg.sender);
    }

    function doForcedWithdrawalFor(
        address exchangeAddress,
        address owner,
        address token,
        uint32 accountID
        )
        external
        payable
        nonReentrant
        onlyOwnerOrManager
    {
        IExchangeV3(exchangeAddress).forceWithdraw{value: msg.value}(owner, token, accountID);

        if (address(this).balance > 0) {
            drain(msg.sender, address(0));
        }
    }

    receive() external payable { }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "./IAgentRegistry.sol";
import "./IBlockVerifier.sol";
import "./IDepositContract.sol";
import "./ILoopringV3.sol";


/// @title ExchangeData
/// @dev All methods in this lib are internal, therefore, there is no need
///      to deploy this library independently.
/// @author Daniel Wang  - <[email protected]>
/// @author Brecht Devos - <[email protected]>
library ExchangeData
{
    // -- Enums --
    enum TransactionType
    {
        NOOP,
        DEPOSIT,
        WITHDRAWAL,
        TRANSFER,
        SPOT_TRADE,
        ACCOUNT_UPDATE,
        AMM_UPDATE,
        SIGNATURE_VERIFICATION,
        NFT_MINT, // L2 NFT mint or L1-to-L2 NFT deposit
        NFT_DATA
    }

    enum NftType
    {
        ERC1155,
        ERC721
    }

    // -- Structs --
    struct Token
    {
        address token;
    }

    struct ProtocolFeeData
    {
        uint32 syncedAt; // only valid before 2105 (85 years to go)
        uint8  takerFeeBips;
        uint8  makerFeeBips;
        uint8  previousTakerFeeBips;
        uint8  previousMakerFeeBips;
    }

    // General auxiliary data for each conditional transaction
    struct AuxiliaryData
    {
        uint  txIndex;
        bool  approved;
        bytes data;
    }

    // This is the (virtual) block the owner  needs to submit onchain to maintain the
    // per-exchange (virtual) blockchain.
    struct Block
    {
        uint8      blockType;
        uint16     blockSize;
        uint8      blockVersion;
        bytes      data;
        uint256[8] proof;

        // Whether we should store the @BlockInfo for this block on-chain.
        bool storeBlockInfoOnchain;

        // Block specific data that is only used to help process the block on-chain.
        // It is not used as input for the circuits and it is not necessary for data-availability.
        // This bytes array contains the abi encoded AuxiliaryData[] data.
        bytes auxiliaryData;

        // Arbitrary data, mainly for off-chain data-availability, i.e.,
        // the multihash of the IPFS file that contains the block data.
        bytes offchainData;
    }

    struct BlockInfo
    {
        // The time the block was submitted on-chain.
        uint32  timestamp;
        // The public data hash of the block (the 28 most significant bytes).
        bytes28 blockDataHash;
    }

    // Represents an onchain deposit request.
    struct Deposit
    {
        uint96 amount;
        uint64 timestamp;
    }

    // A forced withdrawal request.
    // If the actual owner of the account initiated the request (we don't know who the owner is
    // at the time the request is being made) the full balance will be withdrawn.
    struct ForcedWithdrawal
    {
        address owner;
        uint64  timestamp;
    }

    struct Constants
    {
        uint SNARK_SCALAR_FIELD;
        uint MAX_OPEN_FORCED_REQUESTS;
        uint MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE;
        uint TIMESTAMP_HALF_WINDOW_SIZE_IN_SECONDS;
        uint MAX_NUM_ACCOUNTS;
        uint MAX_NUM_TOKENS;
        uint MIN_AGE_PROTOCOL_FEES_UNTIL_UPDATED;
        uint MIN_TIME_IN_SHUTDOWN;
        uint TX_DATA_AVAILABILITY_SIZE;
        uint MAX_AGE_DEPOSIT_UNTIL_WITHDRAWABLE_UPPERBOUND;
    }

    // This is the prime number that is used for the alt_bn128 elliptic curve, see EIP-196.
    uint public constant SNARK_SCALAR_FIELD = 21888242871839275222246405745257275088548364400416034343698204186575808495617;

    uint public constant MAX_OPEN_FORCED_REQUESTS = 4096;
    uint public constant MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE = 15 days;
    uint public constant TIMESTAMP_HALF_WINDOW_SIZE_IN_SECONDS = 7 days;
    uint public constant MAX_NUM_ACCOUNTS = 2 ** 32;
    uint public constant MAX_NUM_TOKENS = 2 ** 16;
    uint public constant MIN_AGE_PROTOCOL_FEES_UNTIL_UPDATED = 7 days;
    uint public constant MIN_TIME_IN_SHUTDOWN = 30 days;
    // The amount of bytes each rollup transaction uses in the block data for data-availability.
    // This is the maximum amount of bytes of all different transaction types.
    uint32 public constant MAX_AGE_DEPOSIT_UNTIL_WITHDRAWABLE_UPPERBOUND = 15 days;
    uint32 public constant ACCOUNTID_PROTOCOLFEE = 0;

    uint public constant TX_DATA_AVAILABILITY_SIZE = 68;
    uint public constant TX_DATA_AVAILABILITY_SIZE_PART_1 = 29;
    uint public constant TX_DATA_AVAILABILITY_SIZE_PART_2 = 39;

    uint public constant NFT_TOKEN_ID_START = 2 ** 15;

    struct AccountLeaf
    {
        uint32   accountID;
        address  owner;
        uint     pubKeyX;
        uint     pubKeyY;
        uint32   nonce;
        uint     feeBipsAMM;
    }

    struct BalanceLeaf
    {
        uint16   tokenID;
        uint96   balance;
        uint     weightAMM;
        uint     storageRoot;
    }

    struct Nft
    {
        address minter;             // Minter address for a L2 mint or
                                    // the NFT's contract address in the case of a L1-to-L2 NFT deposit.
        NftType nftType;
        address token;
        uint256 nftID;
        uint8   creatorFeeBips;
    }

    struct MerkleProof
    {
        ExchangeData.AccountLeaf accountLeaf;
        ExchangeData.BalanceLeaf balanceLeaf;
        ExchangeData.Nft         nft;
        uint[48]                 accountMerkleProof;
        uint[24]                 balanceMerkleProof;
    }

    struct BlockContext
    {
        bytes32 DOMAIN_SEPARATOR;
        uint32  timestamp;
        Block   block;
        uint    txIndex;
    }

    // Represents the entire exchange state except the owner of the exchange.
    struct State
    {
        uint32  maxAgeDepositUntilWithdrawable;
        bytes32 DOMAIN_SEPARATOR;

        ILoopringV3      loopring;
        IBlockVerifier   blockVerifier;
        IAgentRegistry   agentRegistry;
        IDepositContract depositContract;


        // The merkle root of the offchain data stored in a Merkle tree. The Merkle tree
        // stores balances for users using an account model.
        bytes32 merkleRoot;

        // List of all blocks
        mapping(uint => BlockInfo) blocks;
        uint  numBlocks;

        // List of all tokens
        Token[] tokens;

        // A map from a token to its tokenID + 1
        mapping (address => uint16) tokenToTokenId;

        // A map from an accountID to a tokenID to if the balance is withdrawn
        mapping (uint32 => mapping (uint16 => bool)) withdrawnInWithdrawMode;

        // A map from an account to a token to the amount withdrawable for that account.
        // This is only used when the automatic distribution of the withdrawal failed.
        mapping (address => mapping (uint16 => uint)) amountWithdrawable;

        // A map from an account to a token to the forced withdrawal (always full balance)
        // The `uint16' represents ERC20 token ID (if < NFT_TOKEN_ID_START) or
        // NFT balance slot (if >= NFT_TOKEN_ID_START)
        mapping (uint32 => mapping (uint16 => ForcedWithdrawal)) pendingForcedWithdrawals;

        // A map from an address to a token to a deposit
        mapping (address => mapping (uint16 => Deposit)) pendingDeposits;

        // A map from an account owner to an approved transaction hash to if the transaction is approved or not
        mapping (address => mapping (bytes32 => bool)) approvedTx;

        // A map from an account owner to a destination address to a tokenID to an amount to a storageID to a new recipient address
        mapping (address => mapping (address => mapping (uint16 => mapping (uint => mapping (uint32 => address))))) withdrawalRecipient;


        // Counter to keep track of how many of forced requests are open so we can limit the work that needs to be done by the owner
        uint32 numPendingForcedTransactions;

        // Cached data for the protocol fee
        ProtocolFeeData protocolFeeData;

        // Time when the exchange was shutdown
        uint shutdownModeStartTime;

        // Time when the exchange has entered withdrawal mode
        uint withdrawalModeStartTime;

        // Last time the protocol fee was withdrawn for a specific token
        mapping (address => uint) protocolFeeLastWithdrawnTime;

        // Duplicated loopring address
        address loopringAddr;
        // AMM fee bips
        uint8   ammFeeBips;
        // Enable/Disable `onchainTransferFrom`
        bool    allowOnchainTransferFrom;

        // owner => NFT type => token address => nftID => Deposit
        mapping (address => mapping (NftType => mapping (address => mapping(uint256 => Deposit)))) pendingNFTDeposits;

        // owner => minter => NFT type => token address => nftID => amount withdrawable
        // This is only used when the automatic distribution of the withdrawal failed.
        mapping (address => mapping (address => mapping (NftType => mapping (address => mapping(uint256 => uint))))) amountWithdrawableNFT;
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;

interface IAgent{}

abstract contract IAgentRegistry
{
    /// @dev Returns whether an agent address is an agent of an account owner
    /// @param owner The account owner.
    /// @param agent The agent address
    /// @return True if the agent address is an agent for the account owner, else false
    function isAgent(
        address owner,
        address agent
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Returns whether an agent address is an agent of all account owners
    /// @param owners The account owners.
    /// @param agent The agent address
    /// @return True if the agent address is an agent for the account owner, else false
    function isAgent(
        address[] calldata owners,
        address            agent
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Returns whether an agent address is a universal agent.
    /// @param agent The agent address
    /// @return True if the agent address is a universal agent, else false
    function isUniversalAgent(address agent)
        public
        virtual
        view
        returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "../../lib/Claimable.sol";


/// @title IBlockVerifier
/// @author Brecht Devos - <[email protected]>
abstract contract IBlockVerifier is Claimable
{
    // -- Events --

    event CircuitRegistered(
        uint8  indexed blockType,
        uint16         blockSize,
        uint8          blockVersion
    );

    event CircuitDisabled(
        uint8  indexed blockType,
        uint16         blockSize,
        uint8          blockVersion
    );

    // -- Public functions --

    /// @dev Sets the verifying key for the specified circuit.
    ///      Every block permutation needs its own circuit and thus its own set of
    ///      verification keys. Only a limited number of block sizes per block
    ///      type are supported.
    /// @param blockType The type of the block
    /// @param blockSize The number of requests handled in the block
    /// @param blockVersion The block version (i.e. which circuit version needs to be used)
    /// @param vk The verification key
    function registerCircuit(
        uint8    blockType,
        uint16   blockSize,
        uint8    blockVersion,
        uint[18] calldata vk
        )
        external
        virtual;

    /// @dev Disables the use of the specified circuit.
    /// @param blockType The type of the block
    /// @param blockSize The number of requests handled in the block
    /// @param blockVersion The block version (i.e. which circuit version needs to be used)
    function disableCircuit(
        uint8  blockType,
        uint16 blockSize,
        uint8  blockVersion
        )
        external
        virtual;

    /// @dev Verifies blocks with the given public data and proofs.
    ///      Verifying a block makes sure all requests handled in the block
    ///      are correctly handled by the operator.
    /// @param blockType The type of block
    /// @param blockSize The number of requests handled in the block
    /// @param blockVersion The block version (i.e. which circuit version needs to be used)
    /// @param publicInputs The hash of all the public data of the blocks
    /// @param proofs The ZK proofs proving that the blocks are correct
    /// @return True if the block is valid, false otherwise
    function verifyProofs(
        uint8  blockType,
        uint16 blockSize,
        uint8  blockVersion,
        uint[] calldata publicInputs,
        uint[] calldata proofs
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Checks if a circuit with the specified parameters is registered.
    /// @param blockType The type of the block
    /// @param blockSize The number of requests handled in the block
    /// @param blockVersion The block version (i.e. which circuit version needs to be used)
    /// @return True if the circuit is registered, false otherwise
    function isCircuitRegistered(
        uint8  blockType,
        uint16 blockSize,
        uint8  blockVersion
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Checks if a circuit can still be used to commit new blocks.
    /// @param blockType The type of the block
    /// @param blockSize The number of requests handled in the block
    /// @param blockVersion The block version (i.e. which circuit version needs to be used)
    /// @return True if the circuit is enabled, false otherwise
    function isCircuitEnabled(
        uint8  blockType,
        uint16 blockSize,
        uint8  blockVersion
        )
        external
        virtual
        view
        returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title IDepositContract.
/// @dev   Contract storing and transferring funds for an exchange.
///
///        ERC1155 tokens can be supported by registering pseudo token addresses calculated
///        as `address(keccak256(real_token_address, token_params))`. Then the custom
///        deposit contract can look up the real token address and paramsters with the
///        pseudo token address before doing the transfers.
/// @author Brecht Devos - <[email protected]>
interface IDepositContract
{
    /// @dev Returns if a token is suppoprted by this contract.
    function isTokenSupported(address token)
        external
        view
        returns (bool);

    /// @dev Transfers tokens from a user to the exchange. This function will
    ///      be called when a user deposits funds to the exchange.
    ///      In a simple implementation the funds are simply stored inside the
    ///      deposit contract directly. More advanced implementations may store the funds
    ///      in some DeFi application to earn interest, so this function could directly
    ///      call the necessary functions to store the funds there.
    ///
    ///      This function needs to throw when an error occurred!
    ///
    ///      This function can only be called by the exchange.
    ///
    /// @param from The address of the account that sends the tokens.
    /// @param token The address of the token to transfer (`0x0` for ETH).
    /// @param amount The amount of tokens to transfer.
    /// @param extraData Opaque data that can be used by the contract to handle the deposit
    /// @return amountReceived The amount to deposit to the user's account in the Merkle tree
    function deposit(
        address from,
        address token,
        uint96  amount,
        bytes   calldata extraData
        )
        external
        payable
        returns (uint96 amountReceived);

    /// @dev Transfers tokens from the exchange to a user. This function will
    ///      be called when a withdrawal is done for a user on the exchange.
    ///      In the simplest implementation the funds are simply stored inside the
    ///      deposit contract directly so this simply transfers the requested tokens back
    ///      to the user. More advanced implementations may store the funds
    ///      in some DeFi application to earn interest so the function would
    ///      need to get those tokens back from the DeFi application first before they
    ///      can be transferred to the user.
    ///
    ///      This function needs to throw when an error occurred!
    ///
    ///      This function can only be called by the exchange.
    ///
    /// @param from The address from which 'amount' tokens are transferred.
    /// @param to The address to which 'amount' tokens are transferred.
    /// @param token The address of the token to transfer (`0x0` for ETH).
    /// @param amount The amount of tokens transferred.
    /// @param extraData Opaque data that can be used by the contract to handle the withdrawal
    function withdraw(
        address from,
        address to,
        address token,
        uint    amount,
        bytes   calldata extraData
        )
        external
        payable;

    /// @dev Transfers tokens (ETH not supported) for a user using the allowance set
    ///      for the exchange. This way the approval can be used for all functionality (and
    ///      extended functionality) of the exchange.
    ///      Should NOT be used to deposit/withdraw user funds, `deposit`/`withdraw`
    ///      should be used for that as they will contain specialised logic for those operations.
    ///      This function can be called by the exchange to transfer onchain funds of users
    ///      necessary for Agent functionality.
    ///
    ///      This function needs to throw when an error occurred!
    ///
    ///      This function can only be called by the exchange.
    ///
    /// @param from The address of the account that sends the tokens.
    /// @param to The address to which 'amount' tokens are transferred.
    /// @param token The address of the token to transfer (ETH is and cannot be suppported).
    /// @param amount The amount of tokens transferred.
    function transfer(
        address from,
        address to,
        address token,
        uint    amount
        )
        external
        payable;

    /// @dev Checks if the given address is used for depositing ETH or not.
    ///      Is used while depositing to send the correct ETH amount to the deposit contract.
    ///
    ///      Note that 0x0 is always registered for deposting ETH when the exchange is created!
    ///      This function allows additional addresses to be used for depositing ETH, the deposit
    ///      contract can implement different behaviour based on the address value.
    ///
    /// @param addr The address to check
    /// @return True if the address is used for depositing ETH, else false.
    function isETH(address addr)
        external
        view
        returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;
pragma experimental ABIEncoderV2;

import "../../lib/Claimable.sol";
import "./ExchangeData.sol";


/// @title IExchangeV3
/// @dev Note that Claimable and RentrancyGuard are inherited here to
///      ensure all data members are declared on IExchangeV3 to make it
///      easy to support upgradability through proxies.
///
///      Subclasses of this contract must NOT define constructor to
///      initialize data.
///
/// @author Brecht Devos - <[email protected]>
/// @author Daniel Wang  - <[email protected]>
abstract contract IExchangeV3 is Claimable
{
    // -- Events --

    event ExchangeCloned(
        address exchangeAddress,
        address owner,
        bytes32 genesisMerkleRoot
    );

    event TokenRegistered(
        address token,
        uint16  tokenId
    );

    event Shutdown(
        uint timestamp
    );

    event WithdrawalModeActivated(
        uint timestamp
    );

    event BlockSubmitted(
        uint    indexed blockIdx,
        bytes32         merkleRoot,
        bytes32         publicDataHash
    );

    event DepositRequested(
        address from,
        address to,
        address token,
        uint16  tokenId,
        uint96  amount
    );

    event NFTDepositRequested(
        address from,
        address to,
        uint8   nftType,
        address token,
        uint256 nftID,
        uint96  amount
    );

    event ForcedWithdrawalRequested(
        address owner,
        uint16  tokenID,
        uint32  accountID
    );

    event WithdrawalCompleted(
        uint8   category,
        address from,
        address to,
        address token,
        uint    amount
    );

    event WithdrawalFailed(
        uint8   category,
        address from,
        address to,
        address token,
        uint    amount
    );

    event NftWithdrawalCompleted(
        uint8   category,
        address from,
        address to,
        uint16  tokenID,
        address token,
        uint256 nftID,
        uint    amount
    );

    event NftWithdrawalFailed(
        uint8   category,
        address from,
        address to,
        uint16  tokenID,
        address token,
        uint256 nftID,
        uint    amount
    );

    event ProtocolFeesUpdated(
        uint8 takerFeeBips,
        uint8 makerFeeBips,
        uint8 previousTakerFeeBips,
        uint8 previousMakerFeeBips
    );

    event TransactionApproved(
        address owner,
        bytes32 transactionHash
    );


    // -- Initialization --
    /// @dev Initializes this exchange. This method can only be called once.
    /// @param  loopring The LoopringV3 contract address.
    /// @param  owner The owner of this exchange.
    /// @param  genesisMerkleRoot The initial Merkle tree state.
    function initialize(
        address loopring,
        address owner,
        bytes32 genesisMerkleRoot
        )
        virtual
        external;

    /// @dev Initialized the agent registry contract used by the exchange.
    ///      Can only be called by the exchange owner once.
    /// @param agentRegistry The agent registry contract to be used
    function setAgentRegistry(address agentRegistry)
        external
        virtual;

    /// @dev Gets the agent registry contract used by the exchange.
    /// @return the agent registry contract
    function getAgentRegistry()
        external
        virtual
        view
        returns (IAgentRegistry);

    ///      Can only be called by the exchange owner once.
    /// @param depositContract The deposit contract to be used
    function setDepositContract(address depositContract)
        external
        virtual;

    /// @dev refresh the blockVerifier contract which maybe changed in loopringV3 contract.
    function refreshBlockVerifier()
        external
        virtual;

    /// @dev Gets the deposit contract used by the exchange.
    /// @return the deposit contract
    function getDepositContract()
        external
        virtual
        view
        returns (IDepositContract);

    // @dev Exchange owner withdraws fees from the exchange.
    // @param token Fee token address
    // @param feeRecipient Fee recipient address
    function withdrawExchangeFees(
        address token,
        address feeRecipient
        )
        external
        virtual;

    // -- Constants --
    /// @dev Returns a list of constants used by the exchange.
    /// @return constants The list of constants.
    function getConstants()
        external
        virtual
        pure
        returns(ExchangeData.Constants memory);

    // -- Mode --
    /// @dev Returns hether the exchange is in withdrawal mode.
    /// @return Returns true if the exchange is in withdrawal mode, else false.
    function isInWithdrawalMode()
        external
        virtual
        view
        returns (bool);

    /// @dev Returns whether the exchange is shutdown.
    /// @return Returns true if the exchange is shutdown, else false.
    function isShutdown()
        external
        virtual
        view
        returns (bool);

    // -- Tokens --
    /// @dev Registers an ERC20 token for a token id. Note that different exchanges may have
    ///      different ids for the same ERC20 token.
    ///
    ///      Please note that 1 is reserved for Ether (ETH), 2 is reserved for Wrapped Ether (ETH),
    ///      and 3 is reserved for Loopring Token (LRC).
    ///
    ///      This function is only callable by the exchange owner.
    ///
    /// @param  tokenAddress The token's address
    /// @return tokenID The token's ID in this exchanges.
    function registerToken(
        address tokenAddress
        )
        external
        virtual
        returns (uint16 tokenID);

    /// @dev Returns the id of a registered token.
    /// @param  tokenAddress The token's address
    /// @return tokenID The token's ID in this exchanges.
    function getTokenID(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint16 tokenID);

    /// @dev Returns the address of a registered token.
    /// @param  tokenID The token's ID in this exchanges.
    /// @return tokenAddress The token's address
    function getTokenAddress(
        uint16 tokenID
        )
        external
        virtual
        view
        returns (address tokenAddress);

    // -- Stakes --
    /// @dev Gets the amount of LRC the owner has staked onchain for this exchange.
    ///      The stake will be burned if the exchange does not fulfill its duty by
    ///      processing user requests in time. Please note that order matching may potentially
    ///      performed by another party and is not part of the exchange's duty.
    ///
    /// @return The amount of LRC staked
    function getExchangeStake()
        external
        virtual
        view
        returns (uint);

    /// @dev Withdraws the amount staked for this exchange.
    ///      This can only be done if the exchange has been correctly shutdown:
    ///      - The exchange owner has shutdown the exchange
    ///      - All deposit requests are processed
    ///      - All funds are returned to the users (merkle root is reset to initial state)
    ///
    ///      Can only be called by the exchange owner.
    ///
    /// @return amountLRC The amount of LRC withdrawn
    function withdrawExchangeStake(
        address recipient
        )
        external
        virtual
        returns (uint amountLRC);

    /// @dev Can by called by anyone to burn the stake of the exchange when certain
    ///      conditions are fulfilled.
    ///
    ///      Currently this will only burn the stake of the exchange if
    ///      the exchange is in withdrawal mode.
    function burnExchangeStake()
        external
        virtual;

    // -- Blocks --

    /// @dev Gets the current Merkle root of this exchange's virtual blockchain.
    /// @return The current Merkle root.
    function getMerkleRoot()
        external
        virtual
        view
        returns (bytes32);

    /// @dev Gets the height of this exchange's virtual blockchain. The block height for a
    ///      new exchange is 1.
    /// @return The virtual blockchain height which is the index of the last block.
    function getBlockHeight()
        external
        virtual
        view
        returns (uint);

    /// @dev Gets some minimal info of a previously submitted block that's kept onchain.
    ///      A DEX can use this function to implement a payment receipt verification
    ///      contract with a challange-response scheme.
    /// @param blockIdx The block index.
    function getBlockInfo(uint blockIdx)
        external
        virtual
        view
        returns (ExchangeData.BlockInfo memory);

    /// @dev Sumbits new blocks to the rollup blockchain.
    ///
    ///      This function can only be called by the exchange operator.
    ///
    /// @param blocks The blocks being submitted
    ///      - blockType: The type of the new block
    ///      - blockSize: The number of onchain or offchain requests/settlements
    ///        that have been processed in this block
    ///      - blockVersion: The circuit version to use for verifying the block
    ///      - storeBlockInfoOnchain: If the block info for this block needs to be stored on-chain
    ///      - data: The data for this block
    ///      - offchainData: Arbitrary data, mainly for off-chain data-availability, i.e.,
    ///        the multihash of the IPFS file that contains the block data.
    function submitBlocks(ExchangeData.Block[] calldata blocks)
        external
        virtual;

    /// @dev Gets the number of available forced request slots.
    /// @return The number of available slots.
    function getNumAvailableForcedSlots()
        external
        virtual
        view
        returns (uint);

    // -- Deposits --

    /// @dev Deposits Ether or ERC20 tokens to the specified account.
    ///
    ///      This function is only callable by an agent of 'from'.
    ///
    ///      The operator is not forced to do the deposit.
    ///
    /// @param from The address that deposits the funds to the exchange
    /// @param to The account owner's address receiving the funds
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param amount The amount of tokens to deposit
    /// @param extraData Optional extra data used by the deposit contract
    function deposit(
        address from,
        address to,
        address tokenAddress,
        uint96  amount,
        bytes   calldata extraData
        )
        external
        virtual
        payable;

    /// @dev Deposits an NFT to the specified account.
    ///
    ///      This function is only callable by an agent of 'from'.
    ///
    ///      The operator is not forced to do the deposit.
    ///
    /// @param from The address that deposits the funds to the exchange
    /// @param to The account owner's address receiving the funds
    /// @param nftType The type of NFT contract address (ERC721/ERC1155/...)
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param nftID The token type 'id`.
    /// @param amount The amount of tokens to deposit.
    /// @param extraData Optional extra data used by the deposit contract.
    function depositNFT(
        address              from,
        address              to,
        ExchangeData.NftType nftType,
        address              tokenAddress,
        uint256              nftID,
        uint96               amount,
        bytes    calldata    extraData
        )
        external
        virtual;

    /// @dev Gets the amount of tokens that may be added to the owner's account.
    /// @param owner The destination address for the amount deposited.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return The amount of tokens pending.
    function getPendingDepositAmount(
        address owner,
        address tokenAddress
        )
        public
        virtual
        view
        returns (uint96);

    /// @dev Gets the amount of tokens that may be added to the owner's account.
    /// @param owner The destination address for the amount deposited.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param nftType The type of NFT contract address (ERC721/ERC1155/...)
    /// @param nftID The token type 'id`.
    /// @return The amount of tokens pending.
    function getPendingNFTDepositAmount(
        address               owner,
        address               tokenAddress,
        ExchangeData.NftType  nftType,
        uint256               nftID
        )
        public
        virtual
        view
        returns (uint96);

    // -- Withdrawals --

    /// @dev Submits an onchain request to force withdraw Ether, ERC20 and NFT tokens.
    ///      This request always withdraws the full balance.
    ///
    ///      This function is only callable by an agent of the account.
    ///
    ///      The total fee in ETH that the user needs to pay is 'withdrawalFee'.
    ///      If the user sends too much ETH the surplus is sent back immediately.
    ///
    ///      Note that after such an operation, it will take the owner some
    ///      time (no more than MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE) to process the request
    ///      and create the deposit to the offchain account.
    ///
    /// @param owner The expected owner of the account
    /// @param tokenID The tokenID to withdraw from
    /// @param accountID The address the account in the Merkle tree.
    function forceWithdrawByTokenID(
        address owner,
        uint16  tokenID,
        uint32  accountID
        )
        external
        virtual
        payable;

    /// @dev Submits an onchain request to force withdraw Ether or ERC20 tokens.
    ///      This request always withdraws the full balance.
    ///
    ///      This function is only callable by an agent of the account.
    ///
    ///      The total fee in ETH that the user needs to pay is 'withdrawalFee'.
    ///      If the user sends too much ETH the surplus is sent back immediately.
    ///
    ///      Note that after such an operation, it will take the owner some
    ///      time (no more than MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE) to process the request
    ///      and create the deposit to the offchain account.
    ///
    /// @param owner The expected owner of the account
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @param accountID The address the account in the Merkle tree.
    function forceWithdraw(
        address owner,
        address tokenAddress,
        uint32  accountID
        )
        external
        virtual
        payable;

    /// @dev Checks if a forced withdrawal is pending for an account balance.
    /// @param  accountID The accountID of the account to check.
    /// @param  token The token address
    /// @return True if a request is pending, false otherwise
    function isForcedWithdrawalPending(
        uint32  accountID,
        address token
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Submits an onchain request to withdraw Ether or ERC20 tokens from the
    ///      protocol fees account. The complete balance is always withdrawn.
    ///
    ///      Anyone can request a withdrawal of the protocol fees.
    ///
    ///      Note that after such an operation, it will take the owner some
    ///      time (no more than MAX_AGE_FORCED_REQUEST_UNTIL_WITHDRAW_MODE) to process the request
    ///      and create the deposit to the offchain account.
    ///
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    function withdrawProtocolFees(
        address tokenAddress
        )
        external
        virtual
        payable;

    /// @dev Gets the time the protocol fee for a token was last withdrawn.
    /// @param tokenAddress The address of the token, use `0x0` for Ether.
    /// @return The time the protocol fee was last withdrawn.
    function getProtocolFeeLastWithdrawnTime(
        address tokenAddress
        )
        external
        virtual
        view
        returns (uint);

    /// @dev Allows anyone to withdraw funds for a specified user using the balances stored
    ///      in the Merkle tree. The funds will be sent to the owner of the acount.
    ///
    ///      Can only be used in withdrawal mode (i.e. when the owner has stopped
    ///      committing blocks and is not able to commit any more blocks).
    ///
    ///      This will NOT modify the onchain merkle root! The merkle root stored
    ///      onchain will remain the same after the withdrawal. We store if the user
    ///      has withdrawn the balance in State.withdrawnInWithdrawMode.
    ///
    /// @param  merkleProof The Merkle inclusion proof
    function withdrawFromMerkleTree(
        ExchangeData.MerkleProof calldata merkleProof
        )
        external
        virtual;

    /// @dev Checks if the balance for the account was withdrawn with `withdrawFromMerkleTree`.
    /// @param  accountID The accountID of the balance to check.
    /// @param  token The token address
    /// @return True if it was already withdrawn, false otherwise
    function isWithdrawnInWithdrawalMode(
        uint32  accountID,
        address token
        )
        external
        virtual
        view
        returns (bool);

    /// @dev Allows withdrawing funds deposited to the contract in a deposit request when
    ///      it was never processed by the owner within the maximum time allowed.
    ///
    ///      Can be called by anyone. The deposited tokens will be sent back to
    ///      the owner of the account they were deposited in.
    ///
    /// @param  owner The address of the account the withdrawal was done for.
    /// @param  token The token address
    function withdrawFromDepositRequest(
        address owner,
        address token
        )
        external
        virtual;

    /// @dev Allows withdrawing funds deposited to the contract in a deposit request when
    ///      it was never processed by the owner within the maximum time allowed.
    ///
    ///      Can be called by anyone. The deposited tokens will be sent back to
    ///      the owner of the account they were deposited in.
    ///
    /// @param owner The address of the account the withdrawal was done for.
    /// @param token The token address
    /// @param nftType The type of NFT contract address (ERC721/ERC1155/...)
    /// @param nftID The token type 'id`.
    function withdrawFromNFTDepositRequest(
        address              owner,
        address              token,
        ExchangeData.NftType nftType,
        uint256              nftID
        )
        external
        virtual;

    /// @dev Allows withdrawing funds after a withdrawal request (either onchain
    ///      or offchain) was submitted in a block by the operator.
    ///
    ///      Can be called by anyone. The withdrawn tokens will be sent to
    ///      the owner of the account they were withdrawn out.
    ///
    ///      Normally it is should not be needed for users to call this manually.
    ///      Funds from withdrawal requests will be sent to the account owner
    ///      immediately by the owner when the block is submitted.
    ///      The user will however need to call this manually if the transfer failed.
    ///
    ///      Tokens and owners must have the same size.
    ///
    /// @param  owners The addresses of the account the withdrawal was done for.
    /// @param  tokens The token addresses
    function withdrawFromApprovedWithdrawals(
        address[] calldata owners,
        address[] calldata tokens
        )
        external
        virtual;

    /// @dev Allows withdrawing funds after an NFT withdrawal request (either onchain
    ///      or offchain) was submitted in a block by the operator.
    ///
    ///      Can be called by anyone. The withdrawn tokens will be sent to
    ///      the owner of the account they were withdrawn out.
    ///
    ///      Normally it is should not be needed for users to call this manually.
    ///      Funds from withdrawal requests will be sent to the account owner
    ///      immediately by the owner when the block is submitted.
    ///      The user will however need to call this manually if the transfer failed.
    ///
    ///      All input arrays must have the same size.
    ///
    /// @param  owners The addresses of the accounts the withdrawal was done for.
    /// @param  minters The addresses of the minters.
    /// @param  nftTypes The NFT token addresses types
    /// @param  tokens The token addresses
    /// @param  nftIDs The token ids
    function withdrawFromApprovedWithdrawalsNFT(
        address[]              memory  owners,
        address[]              memory  minters,
        ExchangeData.NftType[] memory  nftTypes,
        address[]              memory  tokens,
        uint256[]              memory  nftIDs
        )
        external
        virtual;

    /// @dev Gets the amount that can be withdrawn immediately with `withdrawFromApprovedWithdrawals`.
    /// @param  owner The address of the account the withdrawal was done for.
    /// @param  token The token address
    /// @return The amount withdrawable
    function getAmountWithdrawable(
        address owner,
        address token
        )
        external
        virtual
        view
        returns (uint);

    /// @dev Gets the amount that can be withdrawn immediately with `withdrawFromApprovedWithdrawalsNFT`.
    /// @param  owner The address of the account the withdrawal was done for.
    /// @param  token The token address
    /// @param  nftType The NFT token address types
    /// @param  nftID The token id
    /// @param  minter The NFT minter
    /// @return The amount withdrawable
    function getAmountWithdrawableNFT(
        address              owner,
        address              token,
        ExchangeData.NftType nftType,
        uint256              nftID,
        address              minter
        )
        external
        virtual
        view
        returns (uint);

    /// @dev Notifies the exchange that the owner did not process a forced request.
    ///      If this is indeed the case, the exchange will enter withdrawal mode.
    ///
    ///      Can be called by anyone.
    ///
    /// @param  accountID The accountID the forced request was made for
    /// @param  tokenID The tokenID of the the forced request
    function notifyForcedRequestTooOld(
        uint32 accountID,
        uint16 tokenID
        )
        external
        virtual;

    /// @dev Allows a withdrawal to be done to an adddresss that is different
    ///      than initialy specified in the withdrawal request. This can be used to
    ///      implement functionality like fast withdrawals.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param from The address of the account that does the withdrawal.
    /// @param to The address to which 'amount' tokens were going to be withdrawn.
    /// @param token The address of the token that is withdrawn ('0x0' for ETH).
    /// @param amount The amount of tokens that are going to be withdrawn.
    /// @param storageID The storageID of the withdrawal request.
    /// @param newRecipient The new recipient address of the withdrawal.
    function setWithdrawalRecipient(
        address from,
        address to,
        address token,
        uint96  amount,
        uint32  storageID,
        address newRecipient
        )
        external
        virtual;

    /// @dev Gets the withdrawal recipient.
    ///
    /// @param from The address of the account that does the withdrawal.
    /// @param to The address to which 'amount' tokens were going to be withdrawn.
    /// @param token The address of the token that is withdrawn ('0x0' for ETH).
    /// @param amount The amount of tokens that are going to be withdrawn.
    /// @param storageID The storageID of the withdrawal request.
    function getWithdrawalRecipient(
        address from,
        address to,
        address token,
        uint96  amount,
        uint32  storageID
        )
        external
        virtual
        view
        returns (address);

    /// @dev Allows an agent to transfer ERC-20 tokens for a user using the allowance
    ///      the user has set for the exchange. This way the user only needs to approve a single exchange contract
    ///      for all exchange/agent features, which allows for a more seamless user experience.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param from The address of the account that sends the tokens.
    /// @param to The address to which 'amount' tokens are transferred.
    /// @param token The address of the token to transfer (ETH is and cannot be suppported).
    /// @param amount The amount of tokens transferred.
    function onchainTransferFrom(
        address from,
        address to,
        address token,
        uint    amount
        )
        external
        virtual;

    /// @dev Allows an agent to approve a rollup tx.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param owner The owner of the account
    /// @param txHash The hash of the transaction
    function approveTransaction(
        address owner,
        bytes32 txHash
        )
        external
        virtual;

    /// @dev Allows an agent to approve multiple rollup txs.
    ///
    ///      This function can only be called by an agent.
    ///
    /// @param owners The account owners
    /// @param txHashes The hashes of the transactions
    function approveTransactions(
        address[] calldata owners,
        bytes32[] calldata txHashes
        )
        external
        virtual;

    /// @dev Checks if a rollup tx is approved using the tx's hash.
    ///
    /// @param owner The owner of the account that needs to authorize the tx
    /// @param txHash The hash of the transaction
    /// @return True if the tx is approved, else false
    function isTransactionApproved(
        address owner,
        bytes32 txHash
        )
        external
        virtual
        view
        returns (bool);

    // -- Admins --
    /// @dev Sets the max time deposits have to wait before becoming withdrawable.
    /// @param newValue The new value.
    /// @return  The old value.
    function setMaxAgeDepositUntilWithdrawable(
        uint32 newValue
        )
        external
        virtual
        returns (uint32);

    /// @dev Returns the max time deposits have to wait before becoming withdrawable.
    /// @return The value.
    function getMaxAgeDepositUntilWithdrawable()
        external
        virtual
        view
        returns (uint32);

    /// @dev Shuts down the exchange.
    ///      Once the exchange is shutdown all onchain requests are permanently disabled.
    ///      When all requirements are fulfilled the exchange owner can withdraw
    ///      the exchange stake with withdrawStake.
    ///
    ///      Note that the exchange can still enter the withdrawal mode after this function
    ///      has been invoked successfully. To prevent entering the withdrawal mode before the
    ///      the echange stake can be withdrawn, all withdrawal requests still need to be handled
    ///      for at least MIN_TIME_IN_SHUTDOWN seconds.
    ///
    ///      Can only be called by the exchange owner.
    ///
    /// @return success True if the exchange is shutdown, else False
    function shutdown()
        external
        virtual
        returns (bool success);

    /// @dev Gets the protocol fees for this exchange.
    /// @return syncedAt The timestamp the protocol fees were last updated
    /// @return takerFeeBips The protocol taker fee
    /// @return makerFeeBips The protocol maker fee
    /// @return previousTakerFeeBips The previous protocol taker fee
    /// @return previousMakerFeeBips The previous protocol maker fee
    function getProtocolFeeValues()
        external
        virtual
        view
        returns (
            uint32 syncedAt,
            uint8 takerFeeBips,
            uint8 makerFeeBips,
            uint8 previousTakerFeeBips,
            uint8 previousMakerFeeBips
        );

    /// @dev Gets the domain separator used in this exchange.
    function getDomainSeparator()
        external
        virtual
        view
        returns (bytes32);

    /// @dev set amm pool feeBips value.
    function setAmmFeeBips(uint8 _feeBips)
        external
        virtual;

    /// @dev get amm pool feeBips value.
    function getAmmFeeBips()
        external
        virtual
        view
        returns (uint8);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;

import "../../lib/Claimable.sol";


/// @title ILoopringV3
/// @author Brecht Devos - <[email protected]>
/// @author Daniel Wang  - <[email protected]>
abstract contract ILoopringV3 is Claimable
{
    // == Events ==
    event ExchangeStakeDeposited(address exchangeAddr, uint amount);
    event ExchangeStakeWithdrawn(address exchangeAddr, uint amount);
    event ExchangeStakeBurned(address exchangeAddr, uint amount);
    event SettingsUpdated(uint time);

    // == Public Variables ==
    mapping (address => uint) internal exchangeStake;

    uint    public totalStake;
    address public blockVerifierAddress;
    uint    public forcedWithdrawalFee;
    uint    public tokenRegistrationFeeLRCBase;
    uint    public tokenRegistrationFeeLRCDelta;
    uint8   public protocolTakerFeeBips;
    uint8   public protocolMakerFeeBips;

    address payable public protocolFeeVault;

    // == Public Functions ==

    /// @dev Returns the LRC token address
    /// @return the LRC token address
    function lrcAddress()
        external
        view
        virtual
        returns (address);

    /// @dev Updates the global exchange settings.
    ///      This function can only be called by the owner of this contract.
    ///
    ///      Warning: these new values will be used by existing and
    ///      new Loopring exchanges.
    function updateSettings(
        address payable _protocolFeeVault,   // address(0) not allowed
        address _blockVerifierAddress,       // address(0) not allowed
        uint    _forcedWithdrawalFee
        )
        external
        virtual;

    /// @dev Updates the global protocol fee settings.
    ///      This function can only be called by the owner of this contract.
    ///
    ///      Warning: these new values will be used by existing and
    ///      new Loopring exchanges.
    function updateProtocolFeeSettings(
        uint8 _protocolTakerFeeBips,
        uint8 _protocolMakerFeeBips
        )
        external
        virtual;

    /// @dev Gets the amount of staked LRC for an exchange.
    /// @param exchangeAddr The address of the exchange
    /// @return stakedLRC The amount of LRC
    function getExchangeStake(
        address exchangeAddr
        )
        public
        virtual
        view
        returns (uint stakedLRC);

    /// @dev Burns a certain amount of staked LRC for a specific exchange.
    ///      This function is meant to be called only from exchange contracts.
    /// @return burnedLRC The amount of LRC burned. If the amount is greater than
    ///         the staked amount, all staked LRC will be burned.
    function burnExchangeStake(
        uint amount
        )
        external
        virtual
        returns (uint burnedLRC);

    /// @dev Stakes more LRC for an exchange.
    /// @param  exchangeAddr The address of the exchange
    /// @param  amountLRC The amount of LRC to stake
    /// @return stakedLRC The total amount of LRC staked for the exchange
    function depositExchangeStake(
        address exchangeAddr,
        uint    amountLRC
        )
        external
        virtual
        returns (uint stakedLRC);

    /// @dev Withdraws a certain amount of staked LRC for an exchange to the given address.
    ///      This function is meant to be called only from within exchange contracts.
    /// @param  recipient The address to receive LRC
    /// @param  requestedAmount The amount of LRC to withdraw
    /// @return amountLRC The amount of LRC withdrawn
    function withdrawExchangeStake(
        address recipient,
        uint    requestedAmount
        )
        external
        virtual
        returns (uint amountLRC);

    /// @dev Gets the protocol fee values for an exchange.
    /// @return takerFeeBips The protocol taker fee
    /// @return makerFeeBips The protocol maker fee
    function getProtocolFeeValues(
        )
        public
        virtual
        view
        returns (
            uint8 takerFeeBips,
            uint8 makerFeeBips
        );
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title AddressSet
/// @author Daniel Wang - <[email protected]>
contract AddressSet
{
    struct Set
    {
        address[] addresses;
        mapping (address => uint) positions;
        uint count;
    }
    mapping (bytes32 => Set) private sets;

    function addAddressToSet(
        bytes32 key,
        address addr,
        bool maintainList
        ) internal
    {
        Set storage set = sets[key];
        require(set.positions[addr] == 0, "ALREADY_IN_SET");

        if (maintainList) {
            require(set.addresses.length == set.count, "PREVIOUSLY_NOT_MAINTAILED");
            set.addresses.push(addr);
        } else {
            require(set.addresses.length == 0, "MUST_MAINTAIN");
        }

        set.count += 1;
        set.positions[addr] = set.count;
    }

    function removeAddressFromSet(
        bytes32 key,
        address addr
        )
        internal
    {
        Set storage set = sets[key];
        uint pos = set.positions[addr];
        require(pos != 0, "NOT_IN_SET");

        delete set.positions[addr];
        set.count -= 1;

        if (set.addresses.length > 0) {
            address lastAddr = set.addresses[set.count];
            if (lastAddr != addr) {
                set.addresses[pos - 1] = lastAddr;
                set.positions[lastAddr] = pos;
            }
            set.addresses.pop();
        }
    }

    function removeSet(bytes32 key)
        internal
    {
        delete sets[key];
    }

    function isAddressInSet(
        bytes32 key,
        address addr
        )
        internal
        view
        returns (bool)
    {
        return sets[key].positions[addr] != 0;
    }

    function numAddressesInSet(bytes32 key)
        internal
        view
        returns (uint)
    {
        Set storage set = sets[key];
        return set.count;
    }

    function addressesInSet(bytes32 key)
        internal
        view
        returns (address[] memory)
    {
        Set storage set = sets[key];
        require(set.count == set.addresses.length, "NOT_MAINTAINED");
        return sets[key].addresses;
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title Utility Functions for addresses
/// @author Daniel Wang - <[email protected]>
/// @author Brecht Devos - <[email protected]>
library AddressUtil
{
    using AddressUtil for *;

    function isContract(
        address addr
        )
        internal
        view
        returns (bool)
    {
        // According to EIP-1052, 0x0 is the value returned for not-yet created accounts
        // and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
        // for accounts without code, i.e. `keccak256('')`
        bytes32 codehash;
        // solhint-disable-next-line no-inline-assembly
        assembly { codehash := extcodehash(addr) }
        return (codehash != 0x0 &&
                codehash != 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470);
    }

    function toPayable(
        address addr
        )
        internal
        pure
        returns (address payable)
    {
        return payable(addr);
    }

    // Works like address.send but with a customizable gas limit
    // Make sure your code is safe for reentrancy when using this function!
    function sendETH(
        address to,
        uint    amount,
        uint    gasLimit
        )
        internal
        returns (bool success)
    {
        if (amount == 0) {
            return true;
        }
        address payable recipient = to.toPayable();
        /* solium-disable-next-line */
        (success, ) = recipient.call{value: amount, gas: gasLimit}("");
    }

    // Works like address.transfer but with a customizable gas limit
    // Make sure your code is safe for reentrancy when using this function!
    function sendETHAndVerify(
        address to,
        uint    amount,
        uint    gasLimit
        )
        internal
        returns (bool success)
    {
        success = to.sendETH(amount, gasLimit);
        require(success, "TRANSFER_FAILURE");
    }

    // Works like call but is slightly more efficient when data
    // needs to be copied from memory to do the call.
    function fastCall(
        address to,
        uint    gasLimit,
        uint    value,
        bytes   memory data
        )
        internal
        returns (bool success, bytes memory returnData)
    {
        if (to != address(0)) {
            assembly {
                // Do the call
                success := call(gasLimit, to, value, add(data, 32), mload(data), 0, 0)
                // Copy the return data
                let size := returndatasize()
                returnData := mload(0x40)
                mstore(returnData, size)
                returndatacopy(add(returnData, 32), 0, size)
                // Update free memory pointer
                mstore(0x40, add(returnData, add(32, size)))
            }
        }
    }

    // Like fastCall, but throws when the call is unsuccessful.
    function fastCallAndVerify(
        address to,
        uint    gasLimit,
        uint    value,
        bytes   memory data
        )
        internal
        returns (bytes memory returnData)
    {
        bool success;
        (success, returnData) = fastCall(to, gasLimit, value, data);
        if (!success) {
            assembly {
                revert(add(returnData, 32), mload(returnData))
            }
        }
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;

import "./Ownable.sol";


/// @title Claimable
/// @author Brecht Devos - <[email protected]>
/// @dev Extension for the Ownable contract, where the ownership needs
///      to be claimed. This allows the new owner to accept the transfer.
contract Claimable is Ownable
{
    address public pendingOwner;

    /// @dev Modifier throws if called by any account other than the pendingOwner.
    modifier onlyPendingOwner() {
        require(msg.sender == pendingOwner, "UNAUTHORIZED");
        _;
    }

    /// @dev Allows the current owner to set the pendingOwner address.
    /// @param newOwner The address to transfer ownership to.
    function transferOwnership(
        address newOwner
        )
        public
        override
        onlyOwner
    {
        require(newOwner != address(0) && newOwner != owner, "INVALID_ADDRESS");
        pendingOwner = newOwner;
    }

    /// @dev Allows the pendingOwner address to finalize the transfer.
    function claimOwnership()
        public
        onlyPendingOwner
    {
        emit OwnershipTransferred(owner, pendingOwner);
        owner = pendingOwner;
        pendingOwner = address(0);
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;

import "./AddressUtil.sol";
import "./ERC20.sol";
import "./ERC20SafeTransfer.sol";


/// @title Drainable
/// @author Brecht Devos - <[email protected]>
/// @dev Standard functionality to allow draining funds from a contract.
abstract contract Drainable
{
    using AddressUtil       for address;
    using ERC20SafeTransfer for address;

    event Drained(
        address to,
        address token,
        uint    amount
    );

    function drain(
        address to,
        address token
        )
        public
        returns (uint amount)
    {
        require(canDrain(msg.sender, token), "UNAUTHORIZED");

        if (token == address(0)) {
            amount = address(this).balance;
            to.sendETHAndVerify(amount, gasleft());   // ETH
        } else {
            amount = ERC20(token).balanceOf(address(this));
            token.safeTransferAndVerify(to, amount);  // ERC20 token
        }

        emit Drained(to, token, amount);
    }

    // Needs to return if the address is authorized to call drain.
    function canDrain(address drainer, address token)
        public
        virtual
        view
        returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title ERC20 Token Interface
/// @dev see https://github.com/ethereum/EIPs/issues/20
/// @author Daniel Wang - <[email protected]>
abstract contract ERC20
{
    function totalSupply()
        public
        virtual
        view
        returns (uint);

    function balanceOf(
        address who
        )
        public
        virtual
        view
        returns (uint);

    function allowance(
        address owner,
        address spender
        )
        public
        virtual
        view
        returns (uint);

    function transfer(
        address to,
        uint value
        )
        public
        virtual
        returns (bool);

    function transferFrom(
        address from,
        address to,
        uint    value
        )
        public
        virtual
        returns (bool);

    function approve(
        address spender,
        uint    value
        )
        public
        virtual
        returns (bool);
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title ERC20 safe transfer
/// @dev see https://github.com/sec-bit/badERC20Fix
/// @author Brecht Devos - <[email protected]>
library ERC20SafeTransfer
{
    function safeTransferAndVerify(
        address token,
        address to,
        uint    value
        )
        internal
    {
        safeTransferWithGasLimitAndVerify(
            token,
            to,
            value,
            gasleft()
        );
    }

    function safeTransfer(
        address token,
        address to,
        uint    value
        )
        internal
        returns (bool)
    {
        return safeTransferWithGasLimit(
            token,
            to,
            value,
            gasleft()
        );
    }

    function safeTransferWithGasLimitAndVerify(
        address token,
        address to,
        uint    value,
        uint    gasLimit
        )
        internal
    {
        require(
            safeTransferWithGasLimit(token, to, value, gasLimit),
            "TRANSFER_FAILURE"
        );
    }

    function safeTransferWithGasLimit(
        address token,
        address to,
        uint    value,
        uint    gasLimit
        )
        internal
        returns (bool)
    {
        // A transfer is successful when 'call' is successful and depending on the token:
        // - No value is returned: we assume a revert when the transfer failed (i.e. 'call' returns false)
        // - A single boolean is returned: this boolean needs to be true (non-zero)

        // bytes4(keccak256("transfer(address,uint256)")) = 0xa9059cbb
        bytes memory callData = abi.encodeWithSelector(
            bytes4(0xa9059cbb),
            to,
            value
        );
        (bool success, ) = token.call{gas: gasLimit}(callData);
        return checkReturnValue(success);
    }

    function safeTransferFromAndVerify(
        address token,
        address from,
        address to,
        uint    value
        )
        internal
    {
        safeTransferFromWithGasLimitAndVerify(
            token,
            from,
            to,
            value,
            gasleft()
        );
    }

    function safeTransferFrom(
        address token,
        address from,
        address to,
        uint    value
        )
        internal
        returns (bool)
    {
        return safeTransferFromWithGasLimit(
            token,
            from,
            to,
            value,
            gasleft()
        );
    }

    function safeTransferFromWithGasLimitAndVerify(
        address token,
        address from,
        address to,
        uint    value,
        uint    gasLimit
        )
        internal
    {
        bool result = safeTransferFromWithGasLimit(
            token,
            from,
            to,
            value,
            gasLimit
        );
        require(result, "TRANSFER_FAILURE");
    }

    function safeTransferFromWithGasLimit(
        address token,
        address from,
        address to,
        uint    value,
        uint    gasLimit
        )
        internal
        returns (bool)
    {
        // A transferFrom is successful when 'call' is successful and depending on the token:
        // - No value is returned: we assume a revert when the transfer failed (i.e. 'call' returns false)
        // - A single boolean is returned: this boolean needs to be true (non-zero)

        // bytes4(keccak256("transferFrom(address,address,uint256)")) = 0x23b872dd
        bytes memory callData = abi.encodeWithSelector(
            bytes4(0x23b872dd),
            from,
            to,
            value
        );
        (bool success, ) = token.call{gas: gasLimit}(callData);
        return checkReturnValue(success);
    }

    function checkReturnValue(
        bool success
        )
        internal
        pure
        returns (bool)
    {
        // A transfer/transferFrom is successful when 'call' is successful and depending on the token:
        // - No value is returned: we assume a revert when the transfer failed (i.e. 'call' returns false)
        // - A single boolean is returned: this boolean needs to be true (non-zero)
        if (success) {
            assembly {
                switch returndatasize()
                // Non-standard ERC20: nothing is returned so if 'call' was successful we assume the transfer succeeded
                case 0 {
                    success := 1
                }
                // Standard ERC20: a single boolean value is returned which needs to be true
                case 32 {
                    returndatacopy(0, 0, 32)
                    success := mload(0)
                }
                // None of the above: not successful
                default {
                    success := 0
                }
            }
        }
        return success;
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title Ownable
/// @author Brecht Devos - <[email protected]>
/// @dev The Ownable contract has an owner address, and provides basic
///      authorization control functions, this simplifies the implementation of
///      "user permissions".
contract Ownable
{
    address public owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /// @dev The Ownable constructor sets the original `owner` of the contract
    ///      to the sender.
    constructor()
    {
        owner = msg.sender;
    }

    /// @dev Throws if called by any account other than the owner.
    modifier onlyOwner()
    {
        require(msg.sender == owner, "UNAUTHORIZED");
        _;
    }

    /// @dev Allows the current owner to transfer control of the contract to a
    ///      new owner.
    /// @param newOwner The address to transfer ownership to.
    function transferOwnership(
        address newOwner
        )
        public
        virtual
        onlyOwner
    {
        require(newOwner != address(0), "ZERO_ADDRESS");
        emit OwnershipTransferred(owner, newOwner);
        owner = newOwner;
    }

    function renounceOwnership()
        public
        onlyOwner
    {
        emit OwnershipTransferred(owner, address(0));
        owner = address(0);
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;

import "./AddressSet.sol";
import "./Claimable.sol";


contract OwnerManagable is Claimable, AddressSet
{
    bytes32 internal constant MANAGER = keccak256("__MANAGED__");

    event ManagerAdded  (address indexed manager);
    event ManagerRemoved(address indexed manager);

    modifier onlyManager(address addr)
    {
        require(isManager(addr), "NOT_MANAGER");
        _;
    }

    modifier onlyFromManager
    {
        require(isManager(msg.sender), "NOT_MANAGER");
        _;
    }

    modifier onlyOwnerOrManager
    {
        require(msg.sender == owner || isManager(msg.sender), "NOT_OWNER_OR_MANAGER");
        _;
    }

    constructor() Claimable() {}

    /// @dev Gets the managers.
    /// @return The list of managers.
    function managers()
        public
        view
        returns (address[] memory)
    {
        return addressesInSet(MANAGER);
    }

    /// @dev Gets the number of managers.
    /// @return The numer of managers.
    function numManagers()
        public
        view
        returns (uint)
    {
        return numAddressesInSet(MANAGER);
    }

    /// @dev Checks if an address is a manger.
    /// @param addr The address to check.
    /// @return True if the address is a manager, False otherwise.
    function isManager(address addr)
        public
        view
        returns (bool)
    {
        return isAddressInSet(MANAGER, addr);
    }

    /// @dev Adds a new manager.
    /// @param manager The new address to add.
    function addManager(address manager)
        public
        virtual
        onlyOwner
    {
        addManagerInternal(manager);
    }

    /// @dev Removes a manager.
    /// @param manager The manager to remove.
    function removeManager(address manager)
        public
        virtual
        onlyOwner
    {
        removeAddressFromSet(MANAGER, manager);
        emit ManagerRemoved(manager);
    }

    function addManagerInternal(address manager)
        internal
    {
        addAddressToSet(MANAGER, manager, true);
        emit ManagerAdded(manager);
    }
}

// SPDX-License-Identifier: Apache-2.0
// Copyright 2017 Loopring Technology Limited.
pragma solidity ^0.7.0;


/// @title ReentrancyGuard
/// @author Brecht Devos - <[email protected]>
/// @dev Exposes a modifier that guards a function against reentrancy
///      Changing the value of the same storage value multiple times in a transaction
///      is cheap (starting from Istanbul) so there is no need to minimize
///      the number of times the value is changed
contract ReentrancyGuard
{
    //The default value must be 0 in order to work behind a proxy.
    uint private _guardValue;

    // Use this modifier on a function to prevent reentrancy
    modifier nonReentrant()
    {
        // Check if the guard value has its original value
        require(_guardValue == 0, "REENTRANCY");

        // Set the value to something else
        _guardValue = 1;

        // Function body
        _;

        // Set the value back
        _guardValue = 0;
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"to","type":"address"},{"indexed":false,"internalType":"address","name":"token","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Drained","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"manager","type":"address"}],"name":"ManagerAdded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"manager","type":"address"}],"name":"ManagerRemoved","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[{"internalType":"address","name":"manager","type":"address"}],"name":"addManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"","type":"address"},{"internalType":"address","name":"","type":"address"}],"name":"canDrain","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"claimOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"exchangeAddress","type":"address"},{"internalType":"address","name":"owner","type":"address"},{"internalType":"address","name":"token","type":"address"},{"internalType":"uint32","name":"accountID","type":"uint32"}],"name":"doForcedWithdrawalFor","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"address","name":"to","type":"address"},{"internalType":"address","name":"token","type":"address"}],"name":"drain","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"addr","type":"address"}],"name":"isManager","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"managers","outputs":[{"internalType":"address[]","name":"","type":"address[]"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"numManagers","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"manager","type":"address"}],"name":"removeManager","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"stateMutability":"payable","type":"receive"}]

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